Increasing Water Flow at Home

Low water pressure can be pretty frustrating especially when you have several chores you need to do before you head out to something else. There are various causes of low water flow, and the solution depends on the issue at hand so be sure to check out this resource.

The great news is that there is something you can do about it. Just try to find out what is causing the problem, and it may surprise you that it’s something small and fixable. It could be something as easy as opening the shutoff valve fully.

But before you can start opening up valves and pipes here and there, test the pressure.

Testing the Water Pressure

You will need to source for a pressure gauge from the store to test the flow. Specifically, it must be the variety that attaches to a hose bib. Ensure that there is no equipment using water and connect the gauge to get the reading. If you find that the flow is significantly lower than the water company claims, then there must be a problem with the mains, and there is nothing you can do with your tools. You will need to talk to your service provider.

Blockages in Faucets

Low water flow can primarily be as a result of simple sand and metal deposits. Hard water has an unusual amount of magnesium and calcium. This can deposit inside shower heads and faucets restricting the efficient flow of water.

To clean the parts of deposits, immerse them in a basin of vinegar. And if the deposits are too stubborn, then it may be a high time you replaced them – everything depreciates, deal with.

Changing the Piping

It is essential to determine the kind of pipes bringing water to your home. If you are still using galvanized pipes, then you may need to have them changed to increase the pressure and flow. Galvanized pipes tend to attract deposits that form little barriers restricting water flow. Ideally, copper or polyvinyl chloride is preferable.

Dealing with a Recent Low-Pressure Problem

If the problem appears to be restricted to your hot water supply network, the problem could be sediments taking residence inside the hot water tank. Flush it and call a professional if the problem persists. Getting a water softener or changing the anode rod often may deal with this problem.

Small supply pipes or leaks in the hot water tank may be another cause for low pressure. And if there are leaks, don’t attempt to repair them by yourself, especially if they are big or you will be dealing with a more significant problem later on.

Leaky mains are a significant cause for low pressure. To fix it, you must first look for any damp spots. But make sure the dampness is not as a result of condensation.

If you still can’t find any leak, note down the meter reading and halt all water usage for a couple of hours. Recheck the reading, and if they have changed, you have a leak somewhere – time to call for professional help.